|
Share your designs! Show your fellow members what you’re up to at work or for fun. We publish images of your CAD models, assemblies, finished products, or other items of interest to Members. Be sure to give us a description of the project, what software version you used, and any particular challenges. Use News/Submit News to send in your contribution!
| 09/03/2008 |
From Gordon Stewart of Revolution Design Pty Ltd |
| From Gordon Stewart of Revolution Design Pty Ltd |
 |
| From Gordon Stewart of Revolution Design Pty Ltd |
|
 |
| From Gordon Stewart of Revolution Design Pty Ltd |
|
|
|
| 09/02/2008 |
Thomas Forsythe of Chester Engineers |
| by Thomas Forsythe of Chester Engineers |
 |
| Marathon Pumps |
| This is a typical pumping arrangement I modeled using Microstation v8 and CADcells.com's 3D Piping Library. As you can see the pipe fittings are very detailed. The flanges have the holes, gasket, and nuts/bolts. Project was for a petroleum client. By Thomas Forsythe of Chester Engineers |
 |
|
| This model was modeled using Microstation v8 and CADcells.com's 3D Piping Library. Model is of a waste water treatment facility in Brazil. By Thomas Forsythe of Chester Engineers |
 |
|
| This waste water treatment facility was modeled using Microstation J and CADcells.com's 3D Piping and 3D Electrical library. All contract documents were generated from the model using 2D hidden line views. By Thomas Forsythe of Chester Engineers |
|
|
| 09/02/2008 |
Commercial Development by Arthur Dent of GHD Adelaide |
| V8 model raytrace of a proposed commercial development using photomatch to create the street montage. There has been no post processing of the image. Its straight off the rendering engine. Materials are mostly customised or original. Cheers John Hipper |
 |
| proposed commercial development |
| By Arthur Dent of GHD Adelaide |
|
|
| 07/13/2006 |
MicroStation J |
| MicroStation J images from Eric Cooper! |
 |
| Heating & Processing Plant |
| This is a 3D model of a combined heating & process plant which I modelled for clash detection and animated walk through. The plant was modelled using MicroStation J. |
 |
| Plant Vehicles |
| These are plant vehicles I have modelled (inset is an example). These vehicles are produced from simple 2D images downloaded from vendor sites. The images along the bottom are samples of the 2D image used. |
 |
| Incinerator Plant |
| I modelled this 3D incinerator plant for a bid with MicroStation SE.The facility depicted in these images is the BNFL B30 plant which was used for receiving and storing fuel from Magnox reactors in the 1950s. Certain areas are now considered at risk of containment loss. Drawings of the facility are very rare, and photography is difficult due to the dangers of human contamination. |
 |
|
|
 |
|
|
 |
|
|
 |
|
|
 |
|
|
| I created a fully detailed 3D model of the plant to aid in the research of solutions & options to minimize risk and conduct repairs for a company called Aker Kvaerner. A wide range of proposed operational solutions was presented to the client, each of which must be systematically tested,
disproved, and eliminated. An accurate 3D model was done with MicroStation to explore these options and then present
them as animations to the client.
More information about me can be found at my website.
--Eric Cooper |
|
|
|
|
|
